Contents
Wahl trimmers are one of the most popular brands on the market. But what do you do when yours breaks down? In this blog post, we’ll show you how to fix a Wahl trimmer in no time.
Checkout this video:
Introduction
If you are having trouble with your Wahl trimmer, there are a few things you can do to try to fix it. First, make sure that the trimmer is properly oiled. If the trimmer is not properly oiled, it will not work properly. Second, make sure that the blade is properly installed. If the blade is not properly installed, the trimmer will not work properly. Finally, if all else fails, you can contact Wahl customer service for further assistance.
What You’ll Need
-Wahl trimmer
-Screwdriver
-Needle nose pliers
-Lubricating oil
Steps to Fix a Wahl Trimmer
Wahl trimmers are one of the most popular brands of beard trimmers on the market. They are known for their quality and durability. However, like any other appliance, they can sometimes break down. In this article, we will show you some steps to fix a Wahl trimmer.
Step One: Check the Blade
The first thing you should do if your Wahl trimmer is not working properly is to check the blade. Make sure that the blade is properly attached and that all the teeth are in place. If the blade is damaged, you will need to replace it.
If the blade is not the problem, then you should check the battery. If the battery is dead, you will need to replace it.
If the battery is not the problem, then you may have a problem with the motor. If this is the case, you will need to take your Wahl trimmer to a qualified repair person for service.
Step Two: Check the Drive Assembly
If your Wahl trimmer is still not working after checking the electrical connections, you may need to check the drive assembly. The drive assembly is what rotates the cutting blades, and if this assembly is damaged or gummed up with hair, your trimmer will not work properly.
To check the drive assembly, first remove the blade from the trimmer. You can do this by loosening the screws that hold the blade in place. Once the blade is removed, take a look at the drive assembly. If you see any damage or debris, clean it off with a cloth or a brush. You may also need to lubricate the drive assembly with a few drops of oil.
Step Three: Check the Motor
If your Wahl trimmer is still not working after replace the batteries and checking the switch, you may have a problem with the motor. To check the motor, first make sure that the trimmer is unplugged. Then remove the blade from the trimmer head. Next, locate the two screws that hold the motor in place and remove them. Be careful not to lose these screws as they are small and easy to misplace.
Once the motor is exposed, you will need to check it for damage. If there are any cracks or other damage to the motor, it will need to be replaced. Once you have determined that the motor is in good working order, reassemble your Wahl trimmer and try it again.
Conclusion
We hope this guide was helpful in teaching you how to fix a Wahl trimmer. For more information on Wahl trimmers, or for further troubleshooting assistance, please consult the Wahl website or speak to a customer service representative.
