If you want your beard trimmer to perform at its best, you need to make sure you keep it properly oiled. In this guide, we’ll show you how to oil your beard trimmer for optimal performance.
Checkout this video:
Introduction
Your beard trimmer is a versatile tool that can help you achieve a wide range of looks, from a neatly trimmed beard to a clean-shaven face. But in order to keep your trimmer performing at its best, it’s important to oil it regularly. This simple maintenance task will help keep your trimmer running smoothly and extend its life.
Here’s how to oil your beard trimmer:
-Start by unplugging your trimmer. You don’t want to risk accidental injury while you’re oiling the blades.
-Remove any attachments from the trimmer. This will give you better access to the blades.
-Locate the oiling port on the trimmer. This is usually a small hole near the blades.
-Open the bottle ofoil and apply a few drops to a cotton swab or clean rag.
-Gently apply the oil to the blades, taking care not to get any on the plastic parts of the trimmer.
-Once you’ve applied enough oil, use a soft cloth to wipe away any excess.
-Reattach any attachments and plug in your trimmer. You’re now ready to start trimming again!
What You Need
To oil your beard trimmer, you will need:
-A clean, dry cloth
-Trimmer oil (some brands include this with the trimmer)
-Scissors (optional)
The Process
Oiling your beard trimmer is a simple process that only takes a few minutes. most trimmers will have a small opening near the blades that you can access with the included oiling tool. If your trimmer doesn’t have an oiling tool, you can use a cotton swab or a piece of cloth.
Before you oil your trimmer, make sure that it is turned off and unplugged. Put a few drops of oil into the opening, and then turn on the trimmer and run it for a few seconds. This will help distribute the oil evenly. Once you’ve done this, turn off the trimmer and wipe away any excess oil with a clean cloth.
Oiling your beard trimmer regularly will help keep it in good condition and prevent the blades from dulling too quickly. It’s important to note, however, that you shouldn’t over-oil your trimmer — too much oil can actually damage the blades. If you notice that your trimmer isn’t cutting as well as it used to, it’s probably time for a new blade rather than more oil.
Conclusion
Be sure to oil your beard trimmer regularly to keep it running smoothly. This will help it last longer and perform better. Follow the manufacturer’s instructions for how often to oil your trimmer. Oiling it before each use is a good idea, especially if you have a lot of facial hair. Apply a few drops of oil to the blades and run the trimmer through your hair a few times. Wipe away any excess oil with a cloth.
