Learn how to replace the trimmer line on a Black and Decker model by following these simple steps.
Checkout this video:
Introduction
In this guide, we will show you how to replace trimmer line on a Black and Decker. This is a relatively easy process that does not require any special tools. Whether you are replacing the trimmer line for the first time or just need to restock, follow these simple steps and you’ll have your trimmer up and running in no time!
Tools and Materials Needed
In order to replace the trimmer line on your Black and Decker, you will need the following:
-a new spool of trimmer line
-a pair of scissors
-a utility knife
-an adjustable wrench (optional)
Steps to Replacing Trimmer Line
1.Remove the spool retainer by depressing the release button and pulling the spool retainer off of the spindle.
2.Unwind any remaining line from the spool.
3.Cut a length of new trimmer line that is about 20 feet long.
4.Thread one end of the new line through the eyelet on the spool retainer and then wind it onto the spool in a clockwise direction. Make sure that you do not wind the line too tight, or it will be difficult to replace the spool onto the spindle.
5.Line up the holes on the spool retainer with the projections on the spindle and then snap it into place. Make sure that the release button is in the locked position.
6.Depress and hold down The trigger to unwind a few feet of line from The new spool before you begin trimming again
Conclusion
In conclusion, knowing how to replace trimmer line on a Black and Decker is a useful skill to have. By following the steps outlined in this article, you can easily and quickly replace the trimmer line on your Black and Decker.
