How to Sharpen Your Hedge Trimmer Blade

How to Sharpen Your Hedge Trimmer Blade – Get your hedge trimmer blade nice and sharp with this easy guide!

Checkout this video:

Hedge Trimmer Blades

Hedge trimmer blades need to be sharpened from time to time in order to keep them functioning properly. You can do this yourself easily with a few simple steps. First, you’ll need to gather a few supplies. You’ll need a sharpening stone, a file, and some protective gloves.

Types of hedge trimmer blades

There are two types of hedge trimmer blades: double-sided and single-sided. Double-sided blades have cutting teeth on both sides of the blade, while single-sided blades only have teeth on one side. Single-sided blades are more common on gas-powered hedge trimmers, while double-sided blades are more common on electric models.

Both types of blades will eventually become dull and will need to be sharpened. The sharpening process is different for each type of blade, so it’s important to know which type of blade you have before you begin.

Double-sided blades:
1. To sharpen double-sided blades, you will need a flat file and a round file.
2. First, use the flat file to remove any nicks or burrs from the cutting edges of the blade.
3. Next, use the round file to sharpen the teeth on both sides of the blade. Be sure to keep the file level with the blade while you work.
4. Finish up by honing the blade with a honing stone or diamond sharpener to maintain a sharp edge.

Single-sided blades:
1. To sharpen single-sided blades, you will need a flat file and a chainsaw sharpener.
2. First, use the flat file to remove any nicks or burrs from the cutting edges of the blade.
3. Next, use the chainsaw sharpener to sharpen the teeth on one side of the blade (the other side will be sharpened by the chain as it rotates). Be sure to keep the chainsaw sharpener level with the blade while you work.. 4 . Finish up by honing

How to tell when your blade is dull

One way to tell if your hedge trimmer blade is getting dull is if it starts leaving a ragged edge on the plants you are trimming. If you notice this happening, it’s time to sharpen the blade. Another sign that the blade is getting dull is if it starts taking longer to make cuts. If you find yourself having to make more than one pass to get through a plant, or if you are having to apply more pressure than usual, it’s time to sharpen the blade.

How to Sharpen Your Hedge Trimmer Blade

It is important to sharpen your hedge trimmer blade on a regular basis to keep it in good condition. A sharp blade will make it easier to cut through hedges and will also help to prevent damage to the plant. In this article, we will show you how to sharpen your hedge trimmer blade.

Step 1: Remove the blade

Before you can sharpen your hedge trimmer blade, you need to remove it from the trimmer. Depending on the model of trimmer you have, this may require a special wrench or tool. Most trimmers have a blade guard that needs to be removed before the blade can be taken off. Once the blade is removed, use a wire brush to remove any dirt, debris or grass build-up that might be on the blade.

Step 2: Use a file or rotary tool

Now that the blade is removed, you can start sharpening. You can use a file or rotary tool to get the job done. If you use a file, hold it at a 45-degree angle to the blade and file in one direction only. If you use a rotary tool, wrap a piece of sandpaper around it or attach a grinding wheel. Again, hold the tool at a 45-degree angle and move it in one direction only.

Step 3: Use a honing stone

After you’ve used a file, use a honing stone to smooth out the blade. A honing stone is a block of abrasive material, usually oil-treated so that it can be lubricated with oil. Honing stones come in different levels of coarseness, so you can choose one that will remove the burrs left by the file and leave a smooth edge.

To use a honing stone:
-Soak the stone in oil for 10 minutes.
-Place the blade on the stone at a 20-degree angle.
-Use light strokes to move the blade across the stone.
-Stone the other side of the blade in the same way.
-Wipe off any excess oil before storing the blade.

Step 4: Reassemble the hedge trimmer

Once you have finished sharpening the blade, it is time to reassemble the hedge trimmer. Begin by lining up the holes in the blade with the holes in the body of the trimmer. If there is a washer between the blade and body, make sure it is in place. Once the blade is aligned with the body, insert the bolts and hand-tighten them. Be careful not to overtighten as this can strip the threads or damage the blade.

Scroll to Top