How to Trim Boxwoods with an Electric Trimmer

Get tips on how to trim boxwoods with an electric trimmer by following these best practices.

Checkout this video:

Introduction

Trimming boxwoods with an electric trimmer is a fast and efficient way to keep your shrubs looking their best. But before you start, it’s important to choose the right trimmer for the job. A good rule of thumb is to select a trimmer that’s designed for use with light-duty shrubs like boxwoods.

Once you’ve selected the right trimmer, it’s time to get started. Here’s a step-by-step guide to help you get the job done quickly and easily:

Step 1: Prep your tools and workspace.
Before you begin, make sure you have all the tools you need. In addition to your electric trimmer, you’ll need a ladder or step stool (if your boxwoods are taller than you are), gloves, and eye protection. Once you have everything you need, clear away any debris from around your boxwoods so you have a nice clean work area.

Step 2: Position your ladder or step stool.
If your boxwoods are taller than you are, you’ll need to use a ladder or step stool to reach the top branches. Position your ladder or stool in a spot where it will be stable and easy for you to reach all the areas you need to trim.

Step 3: Put on your gloves and eye protection.
Now that your workspace is prepped and ready, it’s time to put on your gloves and eye protection. This will help keep you safe as you work.

Step 4: Start trimming!
Now it’s time for the fun part — trimming your boxwoods! Begin by holding the trimmer at a 45-degree angle and cutting away any dead or damaged branches. Once you’ve removed all the deadwood, start shaping your shrub by making cuts at different angles until you’re happy with the overall shape. When trimming, always cut just above a leaf bud so new growth will sprout from that point. And be sure to avoid leaving any stubs, which can damage the plant.

Boxwood Shapes

When it comes to boxwoods, there are three primary shapes to choose from:
– globe
– pyramid
– cone

Each of these shapes can be achieved with an electric trimmer. Read on for instructions on how to trim each type of boxwood.

Globe: Start by trimming the sides of the globe shape. Hold the trimmer at a 45-degree angle and make sure that the blade is level with the top of the globe. Use long, even strokes to create a symmetrical shape. Next, trim the top of the globe by holding the trimmer at a 90-degree angle and making sure that the blade is level with the sides of the globe. Use short, even strokes to create a flat surface. Finally, trim any stray branches that are sticking out from the sides or top of the globe.

Pyramid: Start by trimming the sides of the pyramid shape. Hold the trimmer at a 45-degree angle and make sure that the blade is level with the top of the pyramid. Use long, even strokes to create a symmetrical shape. Next, trim the top of the pyramid by holdingthe trimmer at a 90-degree angle and making sure thatthe blade is level withthe sides ofthe pyramidUse short, even strokes to create a pointy shape. Finally, trim any stray branches that are sticking out fromthe sides ortopofthe pyramid5

Cone: Start bytrimmingthesidesofthecone shapeHoldthetrimmer ata 45-degreeangle and makesurethat | | _____|_____|_____ variable blank lines before and after table

The Right Time to Trim

To keep your boxwoods looking their best, it’s important to give them a trim at the right time of year. The best time to trim boxwoods is in late winter or early spring, before new growth begins. This will give the plant time to heal and recover from the trimming before it has to put all its energy into new growth.

Tools You Will Need

In order to trim boxwoods with an electric trimmer, you will need a few tools. First, you will need gloves to protect your hands from the sharp blades. Second, you will need eye protection to keep the debris out of your eyes. Third, you will need a pair of pruning shears to cut any large branches that the trimmer cannot reach. Finally, you will need the electric trimmer itself.

Preparing the Boxwood

Before you start trimming, it’s important to decide how you want your boxwood to look. You may want a natural, informal look, or you may prefer a more formal, geometric shape. Once you have an idea of the shape you want, it’s time to start trimming.

To begin, cut off any dead or damaged branches. Then, using an electric trimmer, start shaping the sides of the bush. For a natural look, make sure that the sides are slightly curved. For a more formal look, you can make the sides straight or even slightly angled.

Next, trim the top of the bush so that it is level or slightly rounded. Be careful not to over-trim, as this can damage the boxwood.

Finally, tidy up the edges by trimming any stray branches or leaves. if necessary, you can use shears to create a clean, straight edge.

Trimming the Boxwood

Boxwoods are a type of shrub that is often used as a hedge or foundation planting. They are easy to care for and maintain, but they do require occasional trimming to keep them looking their best.

An electric trimmer is the best tool for the job, as it will give you a clean, even cut. Follow these steps to trim your boxwoods with an electric trimmer:

1.Start by picking out any dead or damaged branches. These can be trimmed away with a sharp pair of pruning shears.

2.Next, use the trimmer to shape the hedge by cutting away any branches that are sticking out or growing too long.

3.Finally, use the trimmer to create a smooth, even edge all around the hedge.

With a little bit of care and attention, your boxwoods will stay looking neat and tidy all year round!

After You Trim

Be sure to clear away all debris, including clippings and leaves, from around the base of the plant. Boxwoods are shallow-rooted and can easily suffer from root rot if the soil is too wet. Add a layer of mulch, such as shredded bark, around the plant to help retain moisture and keep down weeds.

Scroll to Top